Our site uses an audience measurement solution that uses cookies to analyze our traffic. The data is stored anonymously and no information is shared with a third party, thus respecting the GDPR.
OK
Disc brake mount facing tool CD-14500   Disc brake mount facing tool   Our new generation of disc brake mount facing tool is designed and manufactured to accurately face frame and fork disc brake mounts to ensure a precise alignment to the rotor. - faces any IS Mount, Post Mount and new …
Bottom bracket tap T47 x 1.0mm right hand thread CD-38210-47   Bottom bracket tap T47 x 1.0mm right hand thread   - T47x1.0mm right hand thread tap - Fits bottom bracket tapping set CD-38200 - Not suitable for intensive use in titanium bottom bracket shell - HSS steel
Bottom bracket tap T47 x 1.0mm left hand thread CD-38211-47   Bottom bracket tap T47 x 1.0mm left hand thread   - T47x1.0mm left hand thread tap - Fits bottom bracket tapping set CD-38200 - Not suitable for intensive use in titanium bottom bracket shell - HSS steel
34mm reaming and facing cutter for 1.1/8'' headset CD-03623-33.8   34mm reaming and facing cutter for 1.1/8'' headset   - to ream and face head tubes before fitting 1. 1/8” traditional headsets (Ø34mm) - The cutter will bore a machined surface to a 45mm diameter then face the top of the head tube surface - fits head tube reaming and …
Head tube reaming and facing set for integrated, semi-integrated and 1.5'' headsets CD-03600   Head tube reaming and facing set for integrated, semi-integrated and 1.5'' headsets   - to ream, chamfer at 45° and face the head tube - quick-release ring for easy installation and fine tuning during cutting operation - delivered without cutter but with conical pilot CD-03605 - to be used with cutting …
Head tube reaming and facing set for Cane Creek semi integrated headset CD-03600-44   Head tube reaming and facing set for Cane Creek semi integrated headset  
Conical pilot for CD-03600 CD-03605   Conical pilot for CD-03600  
Lower cutter for 1.1/8'' Cane Creek integrated headset CD-03621-41.15   Lower cutter for 1.1/8'' Cane Creek integrated headset  
Lower cutter for 1'' and 1.1/8'' Campagnolo integrated headset CD-03621-41.95   Lower cutter for 1'' and 1.1/8'' Campagnolo integrated headset  
Upper cutter for 1.1/8'' Cane Creek integrated headset CD-03622-41.15   Upper cutter for 1.1/8'' Cane Creek integrated headset  
44mm reaming and facing cutter for 1.1/8'' Cane Creek CD-03623-44   44mm reaming and facing cutter for 1.1/8'' Cane Creek  
49,55mm reaming and facing cutter for tool set CD-03600 - 1,5'''' traditional headset CD-03623-49.55   49,55mm reaming and facing cutter for tool set CD-03600 - 1,5'''' traditional headset   - to ream and face head tubes before fitting 1.5” traditional headsets The cutter will bore a machined surface to a 49,55mm diameter and to a 1” depth (28,5mm) and then face the top of the head tube surface - fits …
52,10mm reaming and facing cutter for tool set CD-03600 - 1,5'''' integrated headset CD-03623-52.10   52,10mm reaming and facing cutter for tool set CD-03600 - 1,5'''' integrated headset   - to ream and face head tubes before fitting 1.5” integrated headsets The cutter will bore a machined surface to a 52,10mm diameter and to a 3,20mm depth, the 45° chamfer, and then face the top of the head tube …
55,95mm reaming and facing cutter for tool set CD-03600 - 1,5'''' semi-integrated headset CD-03623-55.95   55,95mm reaming and facing cutter for tool set CD-03600 - 1,5'''' semi-integrated headset   - only fits head tube reaming and facing set CD-03600 - to ream head tube I.D. to 55.95mm and face head tubes before fitting 1.5" semi-integrated headsets - high quality HSS-CO steel - high precision CNC machining - to …
42mm reaming and facing cutter for BB30 bottom bracket shell CD-03623-BB30   42mm reaming and facing cutter for BB30 bottom bracket shell   - only fits head tube reaming and facing set CD-03600 - to ream to 42mm and face BB30 bottom bracket shell - high quality HSS-CO steel - high precision CNC machining - to be used with cutting oil CD-77000
41mm reaming & facing cutter for Press Fit CD-03623-PF   41mm reaming & facing cutter for Press Fit   - only fits head tube reaming and facing set CD-03600 - to ream to 42mm and face Press Fit bottom bracket shell - high quality HSS-CO steel - high precision CNC machining - to be used with cutting oil CD-77000
46mm reaming & facing cutter for Press Fit 30 CD-03623-PF30   46mm reaming & facing cutter for Press Fit 30   - only fits head tube reaming and facing set CD-03600 - to ream to 46mm and face Press Fit 30 bottom bracket shell - high quality HSS-CO steel - high precision CNC machining - to be used with cutting oil CD-77000
Frame tap - 3mmx0.5 CD-04100-03   Frame tap - 3mmx0.5   - 3mmx0.5 for rear wheel dropout alignment screws - HSS steel
Set 2 frame taps 5mmx0.8 CD-04100-05   Set 2 frame taps 5mmx0.8   Set 2 HSS frame taps 5mmx0.8 for water-bottle, toe-clip, fender & rack boss
Set 2 frame taps 6mmx1 CD-04100-06   Set 2 frame taps 6mmx1   Set 2 HSS taps 6mmx1 for cantilever brakes & large fender bosses
Set 2 frame taps 10mmx1 CD-04100-10   Set 2 frame taps 10mmx1   - Set 2 HSS taps 10mmx1 for gear hanger - Fit tap handle DV-04320 and DV-04340 - To be used with cutting oïl CD-77000
thru axle taps 12x100 CD-04112-1   thru axle taps 12x100   - To renovate thread of 12x100 mm thru-axle - Fit tap handle DV-04320 and DV-04340 - precision ground and hardened high speed steel - To be used with cutting oïl CD-77000
thru axle taps 12x150 CD-04112-1.5   thru axle taps 12x150   - To renovate thread of 12x150 mm thru-axle - Fit tap handle DV-04320 and DV-04340 - precision ground and hardened high speed steel - To be used with cutting oïl CD-77000
thru axle taps 12x175 CD-04112-1.75   thru axle taps 12x175   - To renovate thread of 12x175 mm thru-axle - Fit tap handle DV-04320 and DV-04340 - precision ground and hardened high speed steel - To be used with cutting oïl CD-77000
thru axle taps 15x100 CD-04115-1   thru axle taps 15x100   - To renovate thread of 15x100 mm thru-axle - Fit tap handle DV-04320 and DV-04340 - precision ground and hardened high speed steel - To be used with cutting oïl CD-77000
thru axle taps 15x150 CD-04115-1.5   thru axle taps 15x150   - To renovate thread of 15x150 mm thru-axle - Fit tap handle DV-04320 and DV-04340 - precision ground and hardened high speed steel - To be used with cutting oïl CD-77000
thru axle taps 20x100 CD-04120-1   thru axle taps 20x100   - To renovate thread of 20x100 mm thru-axle - Fit tap handle DV-04320 and DV-04340 - precision ground and hardened high speed steel - To be used with cutting oïl CD-77000
thru axle taps 20-150 CD-04120-1.5   thru axle taps 20-150   - To renovate thread of 20x150 mm thru-axle - Fit tap handle DV-04320 and DV-04340 - precision ground and hardened high speed steel - To be used with cutting oïl CD-77000
thru axle taps 20-200 CD-04120-2   thru axle taps 20-200   - To renovate thread of 20x00 mm thru-axle - Fit tap handle DV-04320 and DV-04340 - precision ground and hardened high speed steel - To be used with cutting oïl CD-77000
Adjustable hand reamer CD-04510-26/29.5   Adjustable hand reamer   Adjustable hand reamer for seat tube - Ø 26 to 29,5mm
Adjustable hand reamer with extension CD-04520-26/29.5   Adjustable hand reamer with extension   - adjustable hand reamer and extension for seat tube
Adjustable hand reamer with extension CD-04520-29.5/33.5   Adjustable hand reamer with extension   Adjustable hand reamer + extension for seat tube - from 29,5 to 33,5mm
Extension for hand reamer CD-04520-26/29.5 CD-04523-27   Extension for hand reamer CD-04520-26/29.5   Adjustable hand reamer + extension for seat tube - from 29,5 to 33,5mm
Rear derailleur dropout repair kit CD-13000   Rear derailleur dropout repair kit  
5 T-nuts for steel derailleur hanger CD-13002-4.95   5 T-nuts for steel derailleur hanger   - set of 5 replacement T-nuts for steel derailleur hanger - 4,95mm thickness
5 T-nuts for steel derailleur hanger CD-13002-5.85   5 T-nuts for steel derailleur hanger   - set of 5 replacement T-nuts for steel derailleur hanger - 5,85mm thickness
Derailleur hanger alignment gauge CD-13900   Derailleur hanger alignment gauge   Designed to control the alignment of rear derailleur hanger and solve most derailleur shifting problems, specially those with index shifting systems. Threads the tool into the derailleur hanger. The tool arm holds a gauge …
Kit of axles and adaptors for old CD-14500 CD-14550   Kit of axles and adaptors for old CD-14500   Kit de mise à jour pour les premières versions du CD-14500 - Adaptateurs 12x100 et 12x157 - Guide pour axe arrière.
Bottom bracket tapping set - without tap CD-38200   Bottom bracket tapping set - without tap  
Bottom bracket tapping set with taps 1.370''x24TPI L&R hand threads CD-38200-1.370   Bottom bracket tapping set with taps 1.370''x24TPI L&R hand threads  
Bottom bracket tapping set with taps 36mmx24 TPI right hand thread CD-38200-36   Bottom bracket tapping set with taps 36mmx24 TPI right hand thread  
Bottom bracket tap 1.370''x24 TPI right hand thread CD-38210-1.370   Bottom bracket tap 1.370''x24 TPI right hand thread   - HSS steel
Bottom bracket tap 36mmx24 right hand thread CD-38210-36   Bottom bracket tap 36mmx24 right hand thread   - HSS steel
Bottom bracket tap 1.370''x24 TPI left hand thread CD-38211-1.370   Bottom bracket tap 1.370''x24 TPI left hand thread   HSS steel
Bottom bracket facing kit CD-38340   Bottom bracket facing kit   - to clean up the faces of the bottom bracket shell of a threaded frame - to remove excess paint from the BB shell to perfectly fit external bottom bracket cups - to also convert a 73mm bottom bracket to a 68mm bottom …
Bottom bracket facing cutter CD-38310-45   Bottom bracket facing cutter  
Set of 2 guides - English thread CD-38320-1.370   Set of 2 guides - English thread  
Set of 2 guides - Italian thread CD-38320-36   Set of 2 guides - Italian thread   - 36mm x 24 TPI right hand guide (Italian)
Tool for guide fitting for CD-38300-45 CD-38330   Tool for guide fitting for CD-38300-45   - CNC machining - tool quality steel - black finish
Frame and fork end alignment gauge set CD-47500   Frame and fork end alignment gauge set  
Biodegradable cutting oil CD-77000   Biodegradable cutting oil   - 300ml aerosol
Ruler for CD-13900 CD-13917   Ruler for CD-13900  
Axe entrainement taraud diam.6 x lg.16 p/ CD-38200 CD-38201   Axe entrainement taraud diam.6 x lg.16 p/ CD-38200  
Facing Cutter D20 for CD-14500 CD-14526   Facing Cutter D20 for CD-14500  
Facing Cutter D13 for CD-14500 CD-14527   Facing Cutter D13 for CD-14500